2001 Arctic Cat ATVs factory service and repair manual, Page 384Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 384

AF600DA AF608DA 5Tighten the frame to rack 10 mm cap screws to 5.5 kg-m (40 ft-lb)Fig8-63 3Remove the cap screws securing
1Unplug the wiring harness from each headlight assembly; then cut the cable tie (if necessary) securing the main wiring harness
to the front bumper2Remove the torx-head screws securing the belly panel to the bumperAccount for two concave washersCC796