2001 Arctic Cat ATVs factory service and repair manual, Page 385Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 385

3Inspect threaded areas of all mounting bosses for stripping4Inspect the wiring harness and headlights for damage5Inspect
to the bumper with torx-head screws and concave washersTighten to 1.1 kg-m (8 ft-lb)Fig8-67 5Connect wiring harness to each
headlight assembly6Secure the wiring harnesses to the bumper assembly with cable tie (if necessary) Front Fender Side Panels
AF608DA REMOVING 3Tighten the two bumper to rack cap screws to 2.8 kg-m (20 ft-lb)Fig8-68 1Remove the front rack (see Front