2001 Arctic Cat ATVs factory service and repair manual, Page 393Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 393

Hand Brake Lever Master Cylinder Assembly NOTE: The master cylinder is non-serviceable component; it must be replaced as
and lock nut securing the brake lever to the master cylinder2Remove the two screws securing the brake reservoir to the master
cylinder; then remove the reservoirAccount for the gasket, the cover, and the O-ringINSPECTING NOTE: Whenever part is worn
excessively, cracked, or damaged in any way, replacement is necessary 2Place an absorbent towel around the connection to
absorb brake fluidRemove the brake hose from the master cylinderFig9-2 1Inspect the bolt securing the brake lever for wear
and for cracked, stretched, or damaged threads2Inspect the O-ring for deterioration and distortion3Inspect the reservoir