2001 Arctic Cat ATVs factory service and repair manual, Page 397Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 397

Throttle Control Fig9-10 3Remove the cap screw, lock washer, and washer securing the actuator arm to the throttle control
purposesFig9-14 1Remove the two machine screws securing the throttle control to the handlebarFig9-11 INSTALLING 2Slide the
grommet out of the lower half of the throttle control; then remove the cable from the actuator armFig9-12 1Place the return
spring into the throttle control; then place the bushing and actuator arm into positionSecure with the cap screw, lock washer,