2001 Arctic Cat ATVs factory service and repair manual, Page 402Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 402

6Place the loop on the lower end of the reverse cable into the slot in the reverse actuator armSecure the cable to the actuator
reverse cable housing to the frame; then while aligning the reverse actuator with the reverse shift shaft, lengthen or shorten
the cable length until the actuator slides freely onto the shift shaft5Tighten the jam nut securing the reverse cable housing
to the frameSecure the reverse actuator to the shift shaft with the cap screwFig9-37 2Loosen the jam nut securing the upper