2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 12Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 12

Preparation For Storage Preparation After Storage Taking the ATV out of storage and correctly preparing it will assure many
spark plugClean or replace as necessary12Inspect the air filter and air cleaner housing for obstructions CAUTION Prior to
storing the ATV, it must be properly serviced to prevent rusting and component deterioration Arctic Cat recommends the following
procedure to prepare the ATV for storage1Clean the seat cushion (cover and base) with damp cloth and allow it to dry2Clean
the ATV thoroughly by washing dirt, oil, grass, and other foreign matter from the entire ATVAllow the ATV to dry thoroughlyDO
NOT get water into any part of the engine or air intake3Either drain the gas tank or add Fuel Stabilizer (pn 0638-165) to
the gas in the gas tankRemove the air filter housing cover and air filterStart the engine and allow it to idle; then using
Arctic Cat Engine Storage Preserver (pn 0636-177), rapidly inject the preserver into the air filter opening for period of
10 to 20 seconds; then stop the engineInstall the air filter and housing cover4Drain the carburetor float chamber5Plug the