2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 25Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 25

1Shift the transmISSIOn into neutral and set the brake lever lock2Elevate the front of the ATV on safety stand until the
until the muffler cools; then install the plug and tighten securelySTYLE B 1Remove the nuts securing the spark arrester;
then remove the arrester ATV0052B When installing the spark plug, be sure to tighten it securelyA new spark plug should be
tightened 112 turn once the washer contacts the cylinder headA used spark plug should be tightened 118114 tum once the washer
contacts the cylinder head Spark Arrester MufflerSpark Arrester The muffler has spark arrester which must be periodically
cleanedAt the intervals shown in the Periodic Maintenance Chart, clean the spark arrester using the following procedure 2Using