2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 26Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 26

3Check the arrester screen for holes or tears, and check the condition of the gasketReplace components as necessary4Install
Cable To adjust the throttle cable free-play, follow this procedure1Slide the rubber boot away; then loosen the jam nut from
the throttle cable adjuster To properly adjust the idle RPM, tachometer is necessaryTo adjust idle RPM, use the following
procedure NOTE: To access the idle adjustment screw, it will be necessary to remove the seat on the 250300 modelsThe idle
adjustment screw is located on the right-hand side of the carburetor on the 400500 models 1With the transmission in neutral,
start the engine and warm it up to normal operating temperature2Tum the idle adjustment screw clockwise one tum past the