2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 29Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 29

5Place the strainer cap into position on the crankcase; then secure with the Phillips-head cap screws (coated with red Loctite
be warm when the oil is changed so the oil will drain easily and completely1Park the ATV on level ground2Remove the oil level
stickfiller plug 4Remove the oil filter plug from the filter mounting boss (located on the front-right side of the transmission
case) and allow the filter to drain completely5Using the Oil Filter Wrench (pn 0444-042) and ratchet handle (or socket or
box-end wrench), remove the old oil filter NOTE: Clean up any excess oil after removing the filter 6Apply oil to new filter