2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 32Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 32

1Using an impact driver, remove the coverRear Drive Account for the O-ring ATV-1096 Rear Drive 400500 FIS 2Loosen the jam
3Rotate the adjustment screw clockwise until it stops4Rotate the adjustment screw counterclockwise 18 tum; then lock the
jam nut securing the adjustment screw NOTE: At this point the clutch should be adjusted correctlyTest ride the ATV to ensure
accurate adjustment CAUTION 5Secure the cover making sure the O-ring is properly positioned Water entering the outer end
of the axle will not be able to enter the rear drive unless the seals are damaged Adjusting Clutch To adjust the clutch,