2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 34Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 34

DriveshaftCoupling The following drive system components should be inspected periodically to ensure proper operationASpline
the key may be sheared, the trigger coil bracket may be bent or damaged, or the CDI unit may be faulty HeadlightTaillightBrakelight
Each time the ATV is used, lights should be checked for proper functionRotate the ignition switch to the lights position;
the headlights and taillight should illuminateTest the brake light by compressing the brake leverThe brakelight should illuminateHEADLIGHT
NOTE: The bulb portion of the headlight is fragileHANDLE WITH CAREWhen replacing the headlight bulb, do not touch the glass
portion of the bulbIf the glass is touched, it must be cleaned with dry cloth before installingSkin oil residue on the bulb
will shorten the life of the bulb NutsBoltsCap Screvvs Tighten all nuts, bolts, and cap screwsMake sure rivets holding components
together are tightReplace all loose rivetsCare must be taken that all calibrated nuts, bolts, and cap screws are tightened