2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 49Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 49

CYLINDER, PISTON, AND RINGS Piston SkirtCylinder Clearance Cylinder Bore 0.060-0.073 mm (0.0024-0.0029 in 82.000-82.015 mm
Groove Clearance (max) (1 st) 0.180 mm (0.0071 in (2nd) 0.150 mm (0.0059 in (1 st) 1.01-1 .03 mm (0.0398-0.0406 in (2nd)
1.01-1.03 mm (0.0398-0.0406 in (oil) 2.01-2.03 mm (0.0791-0.0799 in (1 st) 0.97-0 .99 mm (0.0381-0.0389 in (2nd) 0.97-0.99
mm (0.0381-0.0389 in (max) 20.03 mm (0 .789 in (min) 19.98 mm (0.787 in (front) 3.6i3610l (rear) 3.6 3610 (low) 2.453 (3513
19121) (high) 1.296 (3527) (1st) 3.083i3712l (2nd) 1.933 2915 (3rd) 1.388i2518l (4th) 1.095 2321 (5th) 0.913i2123l (reverse)
2.833 34112 0.1-0.3 mm (0.004-0.012 in (max) 0.2 mm (0.008 in 0.1-0.3 mm (0.004-0.012 in Piston Ring Groove Width Piston
Ring Thickness Engine Fork To Groove (side clearance) Secondary Transmission Fork to Groove (side clearance) Reverse Fork
to Groove (side clearance) Piston Pin Bore Piston Pin Outside Diameter CRANKSHAFT Connecting Rod (max) 20.04 mm (small end
inside diameter) (0.7889 in Connecting Rod (big end side-to-side) Connecting Rod (big end width) Connecting Rod (small end