2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 55Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 55

20Disconnect the main wiring harness connectors 29Secure the upper rear of the ATV to the support stand using tie-down straps
suitable work stand and remove the rear wheels 31Remove the cap screw securing the front engine mount to the sub-frameAccount
for spacers23Remove the rear hydraulic brake caliper24Remove the auxiliary brake25Remove the torx-head screw securing the
brake hose to the upper suspension arm26Remove the two oil cooler hoses from the engine27Remove the skid plate from the rear
end assembly28Remove the two lower cap screws securing the sub-frameengine assembly to the frame32Remove the upper shock
mount cap screw to allow access for removal of the two rear engine mount cap screws33Remove the two rear cap screws and flat