2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 60Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 60

Removing Left-Side Components ARecoil Starter BStarter Cup CCoverStator Assembly 1Remove the cap screws securing the recoil
is on the shaft or in the cover NOTE: For steps 5-21, refer to illustration CC846A (4x4) or to illustration CC873A (2x4)
NOTE: To aid in installing, it is recommended that the assemblies are kept together and IN ORDER AT THIS POINT To service
the recoil starter, see Servicing Left-Side Components sub-section 2Remove the nut and lock washer securing the starter cup
to the crankshaft; then remove the starter cupAccount for the O-ring inside the cup 5Remove the nut securing the magneto
rotor to the crankshaft (D)6Remove the starter idler gear assembly (E); then account for the spacer, the starter idler gear,
and shaftABCDEFG CC846A (4x4) Sub-Transmission Shaft Driveshaft Countershaft Crankshaft Starter Idler Gear Assembly Magneto