2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 80Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 80

4Slowly release the friction plate and lift the plate with ratchet guide free of the recoil case; then remove the ratchet
then untie the knot in the rope and remove the handle NOTE: Do not remove the spiral spring unless replacement is necessaryIt
should be visually inspected in place to save timeIf replacement is necessary, follow steps 9-10 6Remove the ratchet and
account for the spring 9Remove the spiral spring from the case by lifting the spring end up and outHold the remainder of
the spring with thumbs and alternately release each thumb to allow the spring to gradually release from the case10Unwind