2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 86Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 86

3Install the pressure plate onto the hub making sure the alignment dots are correctly positioned CC926 CAUTION 4Place the
positions are used, the hub and plate will have clearance between them and they will not operate properly NOTE: The primary
clutch assembly is now completely assembled for installation INSPECTING OIL PUMP 1Inspect the pump for damage2It is inadvisable
to remove the screw securing the pump halvesIf the oil pump is damaged, it must be replaced 5Place the primary gear assembly
on clean, flat surface; then install the primary washer into the assembly Servicing Center Crankcase Components NOTE: Whenever