2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 94Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 94

CAUTION It is very important to assure the oil feed hole in the bushing and oil supply hole in the driveshaft alignIf not
toward the 3rd driven gear as noted in disassembling 6In order, install the 3rd driven gear, washer (right side), and circlip
onto the drive shaft NOTE: Secure with the circlip 8Install the 1st driven washer (left side) onto the shoulder of the splined