2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 101Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 101

2Using plastic mallet, lightly tap the case halves together until cap screws can be installed3From the left side, install
CC488D 16On the 300, install the oil breather screen noting the direction of the tabs from disassembly Joining Crankcase
Halves 1Verify that the alignment pins are in place and that both case halves are clean and grease freeApply Three Bond Sealant
(pin 0636-070) to the mating surfacesPlace the right-side half onto the left-side half4From the right side, install the cap