2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 104Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 104

& CAUTION The clutch hub and the pressure plate must be seated in the proper positionIf any of the incorrect positions are
together tightly prior to tightening the nut securing the primary clutch assembly CPrimary Clutch DStarter Clutch Shoe NOTE:
Steps 1-8 in the preceding sub-section must precede this procedure 9Install the oil pump drive gear onto the crankshaft making
sure the pin is properly positioned NOTE: The shoulder of the gear must be directed inward 12Using clutch sleeve hub holder,
install the nut and washerTighten to kg-m (58 ft-Ib) 10Install the primary driven washer and sleeve onto the countershaft