2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 112Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 112

NOTE: Steps 1-4 in the preceding sub-section must precede this procedure 5Place the chain guide into the cylinder 8Install
the remaining cylinder head nuts 6On the 300, install the a-ring onto the front left-side stud 10In crisscross pattern, tighten
the three cylinder head cap nuts and one nut to 2.5 kg-m (18 ft-Ib)Tighten the remaining head nuts and the cylinder-to-crankcase
nuts to 1.1 kg-m (8 ft-Ib)7Place the head gasket into position on the cylinderPlace the alignment pins into position; then