2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 122Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 122

16Remove the four cap screws securing the rear output joint to the transmission and push the shaft away from the transmission
with the removal procedure ADisconnect the crankcase vent hose from the air cleaner housingRemove the clamps securing the
air intake hose to the carburetor; then remove the air cleaner housing 19Remove the clamps securing the two oil cooler hoses
to the engine; then disconnect the hoses NOTE: After disconnecting the oil cooler hoses, plug them to prevent leakage from
the cooler BLoosen the clamps securing the carburetor boot and the air inlet boot 20Disconnect the high tension lead from