2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 154Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 154

MEASURING SHIFT FORK (Thickness) NOTE: Whenever shift fork is out of tolerance, replacement is necessary#1 and #2 SHIFT FORK
and the groove 2Shift fork thickness must be within the specified rangeSHIFT FORK THICKNESS #1 and #2 Secondary Transmission
Reverse 4.3-4.4 mm (0.169-0.173 in 5.3-5.4 mm (0.209-0.213 in 3.8-3.9 mm (0.150-0.153 in MEASURING SHIFT FORK GROOVE (Width)
3Shift fork to groove side clearance must be within specificationsSHIFT FORK TO GROOVE SIDE CLEARANCE Engine 0.1-0.3 mm (0.004-0.012
in 0.2 mm (0 .008 in 0.1-0.3 mm (0.004-0.012 in 1Using calipers, in tum measure the width of each shift fork groove Secondary