2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 169Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 169

1Install the 4th drive washer onto the countershaft2Install the 4th drive gear making sure the bushing is in position; then
assembled for installation 4Install the 5th drive washer and 5th drive gear onto the countershaft Assembling Crankcase Half
NOTE: For ease of assembly, install components on the left-side crankcase half NOTE: If the output shaft and gear were removed,
make sure that the proper shim is installed 1To install the output shaft and gear, place the shaft into position with proper