2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 176Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 176

14Install the starter clutch shoe and washer; then secure with the starter clutch-shoe nut (left-hand threads)Tighten to
pattern making sure there is no clearance between the clutch plates when secured FOil Filter NOTE: Steps 1-17 of the preceding
sub-sections must precede this procedure NOTE: Lubricate all internal components with 10W-40 oil prior to installing the
right-side cover NOTE: Care should be taken that the alignment pins are installed in the right-side cover 16Install the clutch
release arm and release roller guide making sure the release roller and guide are aligned 18Place the gasket and right-side