2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 180Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 180

16In crisscross pattern, tighten the cap screws to 0.9-1.3 kg-m (6.5-9.5 ft-lb)17Place the gear shift stopper wisp ring and
cupTighten the flange nut to 3.5 kg-m (25 ft-lb) 18Place the speedometer drive adapter and gasket into position and secure
with the two cap screwsTighten securely 20Place the recoil starter assembly into position on the left-side cover; then tighten