2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 190Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 190

21Install the gas tank (see Section 4)22Place the right-side and left-side panels into position; then install the existing
Components 3-167 Assembling Crankcase Half 3-184 Joining Crankcase Halves 3-186 Installing Right-Side Components 3-187 Installing
Left-Side Components 3-191 Installing Top-Side Components 3-193 Installing EnginefTransmission 3-199 25Install the battery
in the tray, install the vent hose, and secure the battery with the hold-down strapConnect the positive battery cable; then
connect the negative cable26Install the seat27Pour the correct amount of recommended oil into the enginetransmission filler
hole; install the filler plug Removing Enginel Transmission Many service procedures can be performed without removing the
engineltransmission from the frameClosely observe the note introducing each sub-section for this important informationIf'
AT THIS POINT If the technician's objective is to servicereplace left-side cover oil seals (3), front output joint oil seal
(1), rear output joint oil seal (1), andor the oil strainer (from beneath the engine transmission), the enginetransmission