2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 191Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 191

2Remove the negative cable from the battery; then remove the positive cableRemove the battery hold-down strap and the battery
fuse blockThis will aid in installing correctly 4Carefully guide the battery cables and fuse block wiring down through the
access hole into the engine compartment for future removing5Drain the oil enginetransmissionfrom beneath the 11Disconnect
the crankcase vent hose from the air cleaner housing Remove the clamps securing the air intake hose to the carburetor; then
remove the air cleaner housing Oil Drain Plug View from Beneath 733-441 A 6Remove the hardware securing the right-side and
left-side panels; then remove the panels7Tum the gas tank valve to the OFF position; then remove the fuel hose and vent hose