2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 192Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 192

14Remove the hardware securing both footrests to the frame and front fender 18Remove the torx-head screws securing the exhaust
front fender to remove the engine; however, removing the screws securing the inner front fenders will allow the fender to
be moved to accommodate the removing of the exhaust pipe and engine 20Remove the hardware securing the exhaust pipe to the
muffler, frame, and engine; then remove the exhaust pipe21Remove the two oil hoses from the engineRoute the hoses out of
the way NOTE: There will be substantial amount of oil draining from the oil hoses when removingPlace drain pan beneath the