2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 194Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 194

29Remove the two cap screws securing the front upper engine mount to the frame 35Remove the caps screws securing the two
screw securing the engine ground wire to the engine34Remove the three engine mounting through-boltsAccount for washer on
the upper bolt and spacer on the lower front bolt 37Remove the torx-head screws securing the left-side clutch plenum to the
engine; then remove the plenum and account for gasket 38Remove the engine from the right side by moving the engine forward
while raising the engine in the rear and rotating the engine counterclockwiseThe engine will come out the right side of the