2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 227Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 227

COUNTERSHAFT CAUTION When disassembling the countershaft, care must be taken to note the direction each major component (dog,
the sliding dog5Remove the high driven gear circlip; then remove the high driven gearAccount for the washer, bushing, and
bearing Assembling Reverse Driven Gear Dog 2Reverse Driven Gear Countershaft Low Driven Gear Bushing High Driven Gear '"737-053A
1Place the high driven gear onto the countershaft making sure the bearing, bushing, and washer are properly positionedSecure
with the circlip2Place the sliding dog onto the countershaft; then secure with the circlipPlace the washer next to the circlip
3Place the low driven gear onto the countershaft making sure the bearing and bushing are properly positioned; then place