2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 237Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 237

9Install two alignment pins and place the left-side cover gasket into positionInstall the left-side coverNoting the different-Iengthed
in this sequence AInstall thin oil ring (3), ring expander (4), and thin oil ring (3) in the bottom groove of the pistonStagger
the end gaps of the upper and lower thin oil rings according to the illustrationFront #1 Compression Ring End Gap #3 Thin
#3 Thin 10Install the starter cup making sure that the O-ring is in place inside the starter cupTighten the nut wlock washer
to 3.5 kg-m (25 ft-Ib)- #2 Compression Ring End Gap and Oil Ring Expander End Gap ATV-108S8 NOTE: Note the direction of the
exhaust side of the piston (5) for correct ring end gap orientation BInstall the compression rings (l and 2) so the letter