2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 243Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 243

31Install the spark plug and tighten to 1.7 kg-m (12 ft-Ib); then install the timing inspection plug Installing EngineTransmission
secure with existing hardware; then install the three engine mounting through-bolts making sure to account for washer on
the upper bolt and spacer on the lower front boltTighten only until snug4Align the front and rear driveshafts and secure
with existing hardwareTighten only until snug5Secure the front upper engine mount to the frame with the cap screwsTighten
to 2.8 kg-m (20 ft-Ib)6Secure the upper engine bracket to the engine with the existing cap screw and flange nutTighten to
2.8 kg-m (20 ft-Ib)7Tighten all engine mounting through-bolts to 5.5 kg-m (40 ft-Ib); then tighten the cap screws securing
the rear CV joint to 2.8 kg-m (20 ft-Ib)Tighten the front driveshaft to 5.5 kg-m (40 ft-Ib); then tighten the two upper rear
engine mounts to 1.7 kg-m (12 ft-Ib) 10Secure the engine ground wire to the engine with cap screwTighten to 1.1 kg-m (8 ft-Ib)11Install