2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 245Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 245

22Place the footrests in position on the frame; then secure with existing hardwareTighten the 10 mm cap screws to 5.5 kg-m
is critical that all wiring be connected correctly to ensure all components function properly 32Place the fuse block into
position and secure with existing screws NOTE: If the mounting screw holes have elongated, it will be necessary to install
larger diameter screws 25Install the rear rack and rear fenders with existing hardwareTighten securely26Secure the wiring
harness to the frame with cable ties27Install the gas tank; then connect the vent hose 33Place the battery into position
in the battery compartment; then install the battery cables and vent hoseSecure with the hold-down strap& CAUTION Battery
acid is harmful if it contacts eyes, skin, or clothingCare must be taken whenever handling battery 34Connect the spark plug