2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 248Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 248

18Remove the torx-head screws securing the exhaust pipe shroud; then remove the shroud NOTE: It is advisable to lock the
of the exhaust pipe and engine 23On the right side, cut the cable ties securing the wiring harness to the frame 20Remove
the hardware securing the exhaust pipe to the muffler, frame, and engine; then remove the exhaust pipe21Remove the two coolant
hoses from the engineRoute the hoses out of the way22Remove the hardware securing the front and rear driveshaftsCC567 24Remove
the positive cable from the starter motor and route it out of the way25Remove the speedometer speedometer gear housingcable