2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 255Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 255

Removing Left-Side Components ABCDRecoil Starter Water Pump Cover RotorFlyvvheel 4Remove the two cap screws securing the
remove the crossover tube from the cylinder headAccount for an O-ring 2Remove the flange nut securing the starter cup to
the crankshaft; then remove the starter cupAccount for the O-ring inside the cup3Using cold chisel, scribe mark showing the
relative position of the shift arm to the shift arm shaft to aid in installing; then remove the shift arm 6Remove the two
cap screws securing the water pump to the engine; then remove the water pump AT THIS POINT To service the water pump, see