2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 267Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 267

2Using the Standard Valve Guide Reamer (pin 0444-017), remove any burrs or tight areas from the valve guide journals CC131D
way down into each valve guide bore; then remove the gauge and measure it with micrometer2Acceptable inside diameter range
is 5.0005.012 mm (0.19690.1973 in3If valve guide is out of tolerance, it must be replacedReplacing Valve Guide NOTE: If valve
guide is worn or damaged, it must be replacedCC143D 1If valve guide needs replacing, insert valve guide remover into the