2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 280Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 280

CRANKSHAFT ASSEMBLY Measuring Connecting Rod (Small End Inside Diameter) 3Acceptable gap range (0.0039-0.0177 in Measuring
indicator and base on the surface platePosition the indicator contact point against the center of the connecting rod small
end journal2Zero the indicator and push the small end of the connecting rod away from the dial indicator3Maximum deflection
is mm (0.12 inMeasuring Connecting Rod (Big End Side-to-Side) ATV-1074 3Zero the indicator and rotate the crankshaft slowly
& CAUTION Care should be taken to support the connecting rod when rotating the crankshaft 1Push the lower end of the connecting
rod to one side of the crankshaft journal2Using feeler gauge, measure the gap between the connecting rod and crankshaft journal
4Maximum runout is 0.08 mm (0.003 in for both sides NOTE: Proceed to check runout on the other end of the crankshaft by positioning