2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 283Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 283

4Install the crank balancer 7Install the driveshaft NOTE: It will be necessary to rotate the crank balancer until the counterweight
holes on the end of the shaft are positioned vertically 5Place the key into the crank balancer keyway; then install the crank
balancer gear making sure the alignment dots on the crank balancer gear and the crankshaft gear align 9Insert the two shift
forks into the sliding dogs noting the direction of the tabs from disassembling; then install the shift fork shaft NOTE: