2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 285Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 285

4Using plastic mallet, lightly tap the case halves together until cap screws can be installed5From the right side, install
only until snug NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 9In crisscrosscase-to-case
pattern, tighten the mm cap screws until the halves are correctly joined; then tighten to 2-2.4 kg-m (14.5-17 ft-Ib) CC697
CC696 3Using propane torch, heat the right-side crankshaft bearing until the oil begins to smoke; then join the two crankcase
halves NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 10In crisscrosscase-to-case pattern,
tighten the mm cap screws to 0.9-1.3 kg-m (6.5-9.5 ft-Ib) NOTE: Rotate the shafts back and forth to ensure no binding or
sticking occurs 11Using liberal amount of grease, assemble the shift cam stoppers; then install them into the top of the