2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 287Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 287

NOTE: When installed correctly, the sides of the drive and driven gears will be flush with each other 8Install the clutch
to 13 kg-m (94 ft-Ib) CAUTION Care must be taken that the directional washer be installed correctly and note that the nut
has left-hand threads itCC604 CAUTION 7Lightly grease the clutch housing seal; then insert the left fixed drive spacer When
installed correctly, the green alignment dot (or the word OUTSIDE) on the one-way clutch DOES NOT SHOW 11Place the clutch
coverclutch housing assembly into position on the crankcase; then secure with the cap screws making sure the different -lengthed
cap screws are in their proper locationTighten to 1.1 kg-m (8 ft-Ib)12Place the air intake plate cushion into position; then