2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 288Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 288

16Place the V-belt into position on the driven clutch and over the front shaft 13Place the fixed driven assembly into position
nut (threads coated with red Loctite #271)Tighten the nut to 10.4-11.8 kg-m (75-85 ft-Ib) 14Slide the fixed drive face onto
the shaft15Spread the faces of the driven clutch by pushing the inner face toward the engine while turning it counterclockwise;
then when the faces are separated, insert wedge (approximately 38 inthick) between the facesRelease the inner face NOTE: