2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 301Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 301

3Near the battery tray, remove the two screws securing the fuse block; then carefully remove all the wiring from the block
the upper shift rod end to the shift lever armRemove the shift rod ATV-0109 View from Beneath 6Remove the hardware securing
the right -side and left-side panels; then remove the panels7Turn the gas tank valve to the OFF position; then remove the
fuel hose and vent hose8Remove the gas tank9Remove the rear fenders and the rear rack (see Section 8)10Remove the hardware
securing both footrests to the frame and front fenderAF941 14Detach the speedometer cable by loosening the knurled nut and
routing the cable away from the enginetransmission AF667D CC861A 11Remove the two cap screws securing the exhaust pipe to
the engine; then loosen the exhaust pipe from the muffler at the juncture in front of the muffler 15Remove the four cap screws