2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 303Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 303

BLower front: One cap screw, nut, spacer, and washer 22Loosen the clamp on the crankcase breather vent hose; then disconnect
mount -toframe cap screws 23Remove the enginetransmission fasteners in the following sequence: mounting DLower rear: One
cap screw and nut with flat washer AUpper front: Two cap screws (inside the bracket) and one cap screw and nut (topside of