2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 313Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 313

18Remove the starter idle gear (G) from the pin; then remove the pin 20Remove the two cap screws securing the starter to
crankcase components only, proceed to Removing Right-Side Components Right-Side Components NOTE: For efficiency, it is preferable
to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician
should use discretion and sound judgmentIf' AT THIS POINT To service anyone specific component, only limited disassembly