2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 315Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 315

NOTE: When removing the right-side cover, account for the release roller guide that it does not fall and cause damage 8Remove
6Remove the water pump drive joint from the water pump shaftAccount for the pin CPrimary Clutch Shoe DPrimary Clutch EStarter
Clutch Housing NOTE: Steps 1-6 in the preceding sub-section must precede this procedure 9Remove the release roller assemblyAccount
for four springs10Remove the starter clutch-shoe nut (left-hand threads) and washer from the driveshaft; then using primary