2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 334Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 334

Cleaning and Inspecting NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
or abnormal bends7Inspect the handle for deteriorationdamage, cracks, or AssemblingInstalling 6Install the ratchet onto its
spring making sure the end is properly installed on the reel 1If removed, insert the spiral spring into the case with the
outer end of the spring around the mounting lug in the case; then wind it in counterclockwise direction until the complete
spring is installed NOTE: The spiral spring must seat evenly in the recoil case 7Install the shaft, spring, and the spring
cover 2Insert the rope through the hole in the reel and tie knot in the end; then wrap the rope counterclockwise around the