2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 336Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 336

SHIFT FORK GROOVE WIDTH #1 and #2 Secondary Transmission Reverse 5.5-5.6 mm (0.217-0.220 in 5.4-5.5 mm (0.213-0.217 in 4.9-5.0
fork and the groove InspectingMeasuring Clutch Driven Plate Warpage 1Inspect each driven plate for warpage and burn marksCC292D
2In turn place each driven plate on the surface plate; then using feeler gauge, measure warpage in several locations 3Shift
fork to groove side clearance must be within specifications SHIFT FORK TO GROOVE SIDE CLEARANCE Engine 0.1-0.3 mm (0.004-0.012
in 0.2 mm (0.008 in 0.2 mm (0.008 in Secondary Transmission (max) Reverse (max) Servicing Right-Side Components NOTE: Whenever
part is worn excessively, cracked, damaged in any way, or out of tolerance, replacement is necessary 3Maximum driven plate