2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 337Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 337

3If the inner race is locked in place or rotates both directions, the drive assembly must be replacedAssembling Primary Clutch
noted, the shoe must be replaced 2Alternately install the drive plates and driven plates onto the hub (starting with and
ending with drive plate) making sure the tabs with the notches are all in line with each other Inspecting clutch shoe groove
ATV1014 Inspecting Starter Clutch Housing 1Inspect the starter clutch housing for burns, marks, scuffs, cracks, scratches,
or uneven wear2If the housing is damaged in any way, the housing must be replacedInspecting Primary One-Way Drive 1Insert
the drive into the clutch housing2Rotate the inner race by hand and verify the inner race rotates only one direction NOTE: