2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 357Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 357

13Place the primary drive one-way clutch into the starter clutch housing noting the word OUTSIDE for proper placement 17Secure
then using crisscross pattern, tighten the four cap screws securely NOTE: Tighten the four roller assembly cap screws in
crisscross pattern making sure there is no clearance between the clutch plates when secured FWater Pump GOil Filter NOTE:
Steps 1-18 of the preceding sub-sections must precede this procedure NOTE: Lubricate all internal components with 10W-40
oil prior to installing the right-side cover 16Install the clutch release arm and release roller gUide making sure the release