2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 358Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 358

NOTE: Care should be taken that the alignment pins are installed in the right-side cover 23Using the oil filter wrench, install
long cap screw with rubber washer 24Install the coolant hose on the water pump and secure with the clamp 21Tighten the cap
screws in crisscross pattern to 0.9-1.3 kg-m (6.5-9.5 ft -lb)22Place the water pump cover onto the right-side cover making
sure the new O-ring is properly positionedTighten securely with the three cap screws Installing Left-Side Components AIdle